User Tools

Site Tools


main:plots

This is an old revision of the document!


Plots

A variety of plots are available in ADCI software. Dose estimation automatically generates a plot upon execution, while the other plots are generates upon request.

Show distribution of detected DCs in Sample

Plot generation
Highlight a single sample within the main GUI and click the icon.

Plot description

  • x-axis
    Number of dicentric chromosomes
  • y-axis
    Frequency of metaphase images

Green bars represent the frequency at which DCs appear in metaphase images in the sample. In this example, ~26% of images in the sample contain 1 DC. The Red dashed line represents the theoretical Poisson distribution (probability of a number of independent events occurring in a fixed time interval).

The dicentric cell distribution under full body X or gamma ray radiation is expected to form a Poisson distribution. Dispersion index and Mu test are used to test this compliance. For a Poisson distribution, the dispersion index is one. Mu test higher than 1.96 indicates over-dispersion. Mu test lower than -1.96 means under-dispersion, which is likely to indicate problems in data sampling. The theoretical Poisson distribution with the average number of DCs as Lambda is the result of fitting a Poisson distribution to the actual DC distribution using maximum likelihood estimation. The chi-square goodness of fit is calculated for the Poisson and the actual DC distribution. The result is the p-value of the hypothesis that the DC distribution comes from the Poisson distribution.

Show distribution of filtering stats for sample

Highlight a single sample and click the icon to show information for a specific filtering stats. See the Image selection model page for explanations of image filtering/selecting stats.

Number of objects

Plot generation
Highlight a single sample within the main GUI, click the icon, and select “Number of objects” from the dropdown.

Plot description

  • x-axis
    Number of objects
  • y-axis
    Number of metaphase images

# of objects is the total number of objects found in an image, excluding noise and nuclei. Ideally, the object count would be 46. The plot visualizes how frequent each object count is within a sample.

Mean chromosome length/width ratio

Plot generation
Highlight a single sample within the main GUI, click the icon, and select “Mean chromosome length/width radio” from the dropdown.

Plot description

  • x-axis
    Chromosome length-width ratio
  • y-axis
    Number of metaphase images

Chromosome length-width ratio is the average length-width ratio of all chromosomes in an image. ADCI software works best with chromosomes which are not too long, or too thin.

Mean candidate density

Plot generation
Highlight a single sample within the main GUI, click the icon, and select “Mean candidate density” from the dropdown.

Plot description

  • x-axis
    Centromere candidate density
  • y-axis
    Number of metaphase images

Centromere candidate density represents average bending level of chromosomes in an image. Severely bent chromosomes generally reduce the accuracy of DC detection.

Mean Chromosome finite difference

Plot generation
Highlight a single sample within the main GUI, click the icon, and select “Mean Chromosome finite difference” from the dropdown.

Plot description

  • x-axis
    Centerline finite difference
  • y-axis
    Number of metaphase images

Represents the average concavity level of chromosomes in an image. Chromosomes showing insufficient centromere constriction generally reduce the accuracy of DC detection.

Number of segmented objects

Plot generation
Highlight a single sample within the main GUI, click the icon, and select “Number of segmented objects” from the dropdown.

Plot description

  • x-axis
    Number of segmented objects
  • y-axis
    Frequency of metaphase images

The number of objects processed by GVF algorithm in an image. Segmented objects (processed by GVF) are a subset of total objects. Ideally, it would also be 46. It is similar to object count, but more stringent.

Classified object/segmented objects

Plot generation
Highlight a single sample within the main GUI, click the icon, and select “Classified object/segmented objects” from the dropdown.

Plot description

  • x-axis
    Classified object/segmented object ratio
  • y-axis
    Percentage of metaphase images

The ratio of objects recognized as chromosomes and segmented objects. Classified objects (recognized as chromosomes) are subset of segmented objects.

Group bin distance

Plot generation
Highlight a single sample within the main GUI, click the icon, and select “Group bin distance” from the dropdown.

Plot description

  • x-axis
    Sample(s) in the plot
  • y-axis
    Group bin distance

This plot is a whisker box graph demonstrating statistics of metaphase image group bin distances in sample(s). A box shows positions of the first quartile, the median and the third quartile of group bin distances in a sample. The two whiskers indicate the minimum and maximum. Text boxes display the numerical values of these stats, as well as group bin distances of the 250th image and the 500th image sorted in ascending order of group bin distances, if applicable. Multiple samples can be plotted together for comparison. If the current plot is not a group bin distance plot, it will erased and the new whisker box will be drawn. If the the current plot is a group bin distance plot, the new whisker box will be drawn as the rightmost box.

Plot calibration curve

Plot generation
Highlight a calibration curve within the main GUI and click the icon. Multiple curves can be plotted simultaneously. A color can be assigned to a curve by highlighting the appropriate curve, selecting a color from the color dropdown list in the Curves section within the main GUI, and clicking the icon.

Plot description

  • x-axis
    Radiation exposure in gray (Gy)
  • y-axis
    Number of DCs per image

The curved line represents the value (in Gy) which will be assigned to a sample during dose estimation based on its calculated DC frequency. A diamond (♦) symbol is present for each calibration sample, based on calculated DC frequency and the physical dose input during calibration curve creation. If curve confidence intervals are shown (see the calibration curve page for more details), upper and lower 95% confidence intervals appear as dashed lines above and below the curve.

Dose estimation

Plot generation
This plot will appear when the dose estimation process is complete.

Plot description

  • x-axis
    Radiation exposure in gray (Gy)
  • y-axis
    Dicentric chromosomes per metaphase images
  • dotted lines
    Each dotted line represents a DC frequency input in the Dose Calculator.

Each DC frequency (dotted line) is colored differently. To determine which DC frequency a dotted line corresponds to, consult the output appearing in the console.

main/plots.1501784539.txt.gz · Last modified: 2017/08/03 18:22 by bshirley